Changing the iPhone 6s battery: step-by-step explanation

repair iPhone 6s battery

One of the essential handicaps of the iPhone, particularly older fashions is the battery life, in relation to each the autonomy of the system and its well being. That, added to the excessive value of constructing a alternative formally causes many customers to decide on to vary the battery manually. Therefore on this publish we’re going to let you know how you are able to do it manually step-by-step.

Check that it’s not a software program glitch

All customers have the means to verify the battery standing of your iPhone by means of Settings, and that is one in every of the the explanation why a lot of them make the determination to vary the battery of their system. However, this indicator might not present totally the battery standing and the proportion it marks is usually questionable. If you need to verify it in your iPhone, all it’s important to do is comply with the following steps.

  1. Open the App of Settings in your iPhone.
  2. Click on “Battery”.
  3. Choose “Battery well being».

First of all, it’s important to know that the proportion offered is the results of a calculation made by the system itself internally, so {that a} software program mismatch could make this information not completely dependable. For this cause, it’s vital that if this metric has been the set off to your determination to vary the battery, you verify that the information offered is absolutely dependable.

For this there are two processes you’ll be able to comply with to make sure the standing of your battery. The first one is to carry out a battery calibration, and the second consists of restore system and go away the cellphone because it was the day you took it out of the field, that’s, with out putting in any backup on it. After performing each processes, you’ll be able to relaxation assured that the proportion offered by the iPhone Settings app is right.

Change the battery by yourself

Carrying out a alternative of the iPhone battery manually is a course of that entails a number of dangers, so the very first thing we need to let you know is that our advice is and can at all times be that this alternative be carried out by an expert, both in a Apple Store by means of the technical service of the Cupertino firm or by means of a technical service licensed by Apple itself, since a collection of information is required first, in addition to adequate ability and the mandatory supplies.

Do you understand the dangers it has?

Obviously, if even understanding that the most really helpful factor is that this alternative is carried out by a certified personnel, you proceed with the thought of ​​doing it your self manually, it’s important to know, earlier than beginning, the dangers that this restore implies to your iPhone. So at the very least you can be totally conscious of what can occur after finishing up the alternative manually.

iPhone 6s

First of all, the second your system is opened by an individual not licensed by Apple to take action, it you’ll lose all guarantee you will have, routinely. In addition, to have the ability to change the battery it’s important to get one other copy and actually, the batteries that Apple or its licensed technical providers use for replacements aren’t on the market wherever, so it’s important to know that the battery you place to the iPhone will at all times be a not authentic and never official battery, so its efficiency could also be fairly completely different from what you initially anticipated. In addition, throughout the alternative course of, in the event you do not need adequate data, abilities or applicable supplies, you’ll be able to harm different components of the system having the ability to go away the iPhone completely ineffective.

Where to purchase the battery

If after understanding all the dangers concerned in altering the battery of your iPhone 6s manually, you proceed with the thought of ​​finishing up the alternative, the very first thing it’s important to do is get a brand new battery. As we advised you, one in every of the handicaps of this course of is that you just won’t be able to make use of the official Apple battery since it’s not on the market.

iPhone 6s in orange background

However, there are numerous shops that present good high quality batteries with the intention to change the one in your iPhone 6s and provides the system a brand new life. Obviously, the efficiency of those batteries won’t be the similar as these supplied by Apple. Here is a hyperlink to Amazon the place you should buy a battery that additionally comes with a equipment to make issues simpler for you because of the instruments it supplies.

Steps to vary the iPhone 6s battery

Before beginning with the steps it’s important to comply with to manually change the battery of your iPhone 6s, we need to remind you, for the final time, to do a really deep reflection to essentially assess whether it is value altering the battery on this approach. of your iPhone with all the dangers that this entails. If after this you’re nonetheless positive of it, then we go away you the steps it’s important to perform.

  1. Turn off your iPhone.
  2. Remove the two 3.4mm Pentalobe P2 screws close to the Lightning connector on the backside fringe of the iPhone.Image 1
  3. Apply mild warmth to the backside fringe of the iPhone, it will soften the adhesive and make it simpler to open.
  4. Apply a suction cup to the decrease left nook of the show meeting. Be very cautious to not place the suction cup on the begin button.
  5. Pull the suction cup upwards with agency and fixed stress to create a small house between the entrance panel and the again case.
  6. At the backside of the iPhone, simply above the headphone jack, there’s a small notch. This is the most secure place to pry open the cellphone. Place the flat fringe of the spudger instrument on this house.Picture 2
  7. Twist the spudger to widen the hole between the entrance panel and the remainder of the cellphone.Picture 3
  8. Insert the flat finish of the spudger into the left facet of the cellphone, between the display screen and the again case, after which slide it down the facet of the cellphone to separate the adhesive and pop the clips.Picture 4
  9. Remove the spudger and reinsert it at the backside edge, the place the iPhone is already open. Now slide it to the proper, alongside the backside edge.
  10. Slide the spudger all the approach down the proper facet to additional separate the adhesive and pop the clips off the display screen.
  11. Use a suction cup to open the display screen and take away all the adhesive.Picture 5
  12. Pull up on the suction cup to take away the entrance panel.
  13. Gently grasp the show meeting and pull it as much as open the iPhone, utilizing the clips at the prime of the entrance panel as a hinge.
  14. Open the display screen at a 90º angle and tilt it towards one thing to maintain it supported when you are working with the system.Picture 6
  15. Remove the two Phillips 000 screws that safe the battery connector bracket.Picture 7
  16. Remove the battery connector bracket from the iPhone.Picture 8
  17. Use the level of a spudger to disconnect the battery connector by prying up the logic board.Picture 9
  18. Push the battery connector away from the motherboard till it stays away from its socket, to keep away from any unintended connection to the battery whilst you work.Picture 10
  19. Remove the 4 Phillips screws that safe the show cable bracket.Picture 11
  20. Remove the show cable bracket.Picture 12
  21. Use the flat finish of a spudger, or a fingernail failing that, to have the ability to disconnect the cable from the entrance flex chamber by prying up from the corresponding base on the logic board.Picture 13
  22. With the flat finish of a spudger, or once more, failing that, a fingernail, disconnect the digitizer cable by prying up from the corresponding base on the logic board.Picture 14
  23. Disconnect the show cable by prying it up from its socket on the logic board.Picture 15
  24. Remove the show meeting.
  25. Using tweezers, peel off the suggestions of the two adhesive strips alongside the backside fringe of the battery. You can even use your fingers very rigorously.Picture 16
  26. Very rigorously and slowly, pull one in every of the adhesive tabs on the battery, in the direction of the backside of the iPhone. Do this constantly, protecting a relentless pressure on the strip till it slides between the battery and the again cowl. Ideally, do it at an angle of 60º or much less.Picture 17
  27. Do the similar course of with the second strip.
  28. Remove the battery.Picture 18
  29. Do the complete course of in reverse, with the new battery, to complete the strategy of changing the battery of your iPhone 6s.