The D-Link DGS-1100-08Pv2 managed change is a really fascinating mannequin as a result of its small measurement and technical traits. Currently there are only a few managed change fashions with 8 Gigabit Ethernet ports and PoE + which might be as small as this, as well as, it’s uncommon to seek out PoE switches with fully passive cooling, so the noise is 0dB. This mannequin is good for superior residence environments and likewise for small places of work the place we’d like sure administration choices. Today in RedesZone we’re going to present you our video overview of the firmware of the D-Link DGS-1100-08Pv2 change.
What administration choices do we now have on this change?
This manageable change belongs to the «Smart» vary of manageable switches, subsequently, we is not going to have as many superior configuration choices because it does with different ranges of the D-Link producer corresponding to DGS-1210 or DGS-1250, with out However, we are going to discover the principle configuration choices that we are going to want in a sophisticated residence surroundings or in a small workplace.
We should keep in mind that this manageable change is price about 100 euros, the worth is because of the potential of having PoE + as much as 30W in all its ports, to the Power Budget of as much as 64W, and that this change permits administration choices. For instance, we are able to purchase this change in on-line shops corresponding to Amazon or PcComponentes, and likewise in bodily shops.
Regarding the administration choices that we now have obtainable on this manageable change, we now have a number of sections the place we are able to make all obtainable choices.
System and Management
In the part of “System»We can configure the title of the system, the situation and likewise the title of the administrator’s contact, as well as, we are able to additionally configure the timeout of the online session that we at present have. In this identical menu we now have the chance to configure the IPv4 interface to entry the manageable change regionally or remotely, by default it’s at 10.90.90.90, however we are able to configure the static IP that we wish and we are able to even configure the DHCP consumer to to acquire IP addressing absolutely robotically. This change doesn’t have L3 traits, subsequently, we will be unable to create a number of IPv4 interfaces for every VLAN that we configure, one thing that does occur with different extra superior fashions from the D-Link producer.
In the part of port configuration We can activate or deactivate them, we are able to additionally configure the velocity and duplex, we are able to additionally configure the completely different profiles for the auto-negotiation of the wired shoppers. Of course, we are able to activate move management on sure ports, and we are able to even put an outline to accurately doc what a sure port is related to. Finally, we are able to additionally activate the Jumbo Frames, this change helps a most body size of 9216 bytes.
Regarding PoE configuration choices, we are able to outline the utmost PoE that we wish this change to assist, the utmost is 64W so we can not exceed this quantity. We may additionally configure the shutdown sequence of the completely different ports, in case of exceeding the brink set in PoE. A really fascinating function is the potential of enabling or not the PoE assist within the completely different Gigabit Ethernet ports, and we are able to even outline a PoE consumption restrict, each by class of PoE system and likewise in mW. Finally, we now have the PD Alive functionalities that can permit us to maintain the units that we energy with PoE all the time energetic, if for some cause these units are blocked, the change will robotically detect it and restart the port.
Regarding the administration choices, we are able to change the administrator password, configure the SNMP protocol and likewise the D-Link Discovery Protocol to make use of the D-Link DNA software program.
The L2 functionalities that we now have on this change are fairly intensive, nevertheless, we is not going to attain the extent of element and superior configuration choices of different D-Link fashions of upper ranges. In this part we are going to discover the next:
- FDB: we are able to see and configure the CAM desk of the change, including static entries with the MAC, VLAN and port the place we now have related a sure system.
- VLANs: we are able to configure VLANs primarily based on 802.1Q, we will even have the potential of configuring VLANs per port, administration VLANs to enter the administration of the manageable change, uneven VLANs, and we are able to even configure voice and video surveillance VLANs.
- Spanning-Tree: we now have each STP and RSTP obtainable to keep away from loops on the hyperlink layer stage, and supply redundancy with a number of bodily hyperlinks
- Loopback Detection: we are able to detect loops within the change itself, if we join a cable from a change port to a different change port, on this means, we are going to disable one of many ports.
- Link Aggregation: we are able to configure a hyperlink aggregation of a number of ports, and making a most of two LACP teams.
- L2 Multicast Control: this change is able to managing multicast visitors effectively, making use of the IGMP Snooping protocol.
As you could have seen, we now have the principle configuration choices that we are going to want in a house and small workplace surroundings.
QoS and Security
If it is advisable to prioritize some Gigabit Ethernet ports over others, this mannequin additionally has the flexibility to configure the QoS intimately. We can prioritize the completely different ports with the 802.1p or DSCP customary, as well as, we could have the potential of configuring the bandwidth limiter per port, to outline a obtain and add velocity individually for every of the eight Gigabit ports that we now have.
Regarding safety choices, we now have a unicast, multicast and broadcast storm management system, along with having the potential of configuring Traffic Segmentation to dam or permit visitors between the completely different ports, and we are able to even configure Port Security to permit solely a sure variety of MAC addresses per port. Logically, all these choices are fairly primary and we should not have as many or as detailed as in different D-Link fashions.
OAM, Monitoring and Green
Finally, D-Link has additionally included OAM to research the community cabling and detect if there’s any sort of drawback, whether or not the Ethernet community cable is badly crimped or the space is simply too nice. Likewise, we are able to additionally view statistics on using bodily ports, configure Port Mirroring to ahead incoming and / or outgoing visitors from one port to a different port for additional evaluation.
Finally, this change has the 802.3az customary for vitality saving, which is regular for D-Link switches because of the truth that it was one of many first to launch D-Link Green for vitality saving.
Meet the firmware in our full video
As we now have defined beforehand, this D-Link DGS-1100-08PV2 change incorporates a lot of configuration choices, subsequently, it’s ultimate for superior residence environments the place we’d like visitors segmentation, both with VLANs or instantly with the “Traffic Segmentation” performance that we now have obtainable on this change, as well as, we are able to additionally configure different extra superior protocols corresponding to voice VLAN and video surveillance, ultimate if we now have VoIP or video surveillance with IP cameras in our residence or workplace.
We should keep in mind that this change mannequin is particularly aimed toward residence customers who wish to have configuration choices on the change with out having to go to higher-end tools, as well as, it’s also appropriate for small places of work the place we now have two entry factors and a few IP cameras, this mannequin is good to energy any such system with none drawback because of its PoE + and the 64W of PoE energy that it gives us with at most.
Once we all know the principle firmware traits of this D-Link DGS-1100-08PV2 change, we suggest you watch our full video the place you possibly can see all of the obtainable configuration choices:
This manageable change is obtainable for about 100 euros, a aggressive value if we contemplate that it’s PoE + with 64W of Power Budget and administration choices in its firmware.
As you could have seen within the earlier video, we now have a number of configuration choices which might be excellent for residence environments and likewise for small places of work, the place we don’t want too superior choices.