FRITZ! OS 7.20 now available for FRITZ! Repeater and FRITZ! Powerline

The primary novelty of the FRITZ! OS 7.20 working system is the incorporation of WPA3 safety for the principle Wi-Fi community and additionally for the visitor community, as well as, they’ve included OWE if we wish to configure the visitor Wi-Fi community as “open », This will permit us to have encryption between the wi-fi purchasers and the entry level, with out the necessity to use any sort of authentication. This OWE know-how permits institutions equivalent to espresso retailers or eating places to supply Wi-Fi wi-fi protection with out the necessity to use entry codes, whereas defending the safety and privateness of their prospects. Logically, for purchasers to make use of this characteristic, they need to assist it, in any other case they won’t connect with OWE however instantly in “open” mode, in order that they run an important threat.

New units suitable with FRITZ! OS 7.20

This new model of the FRITZ! OS 7.20 working system can now be downloaded and put in on Wi-Fi repeaters FRITZ! Repeater 1750E and FRITZ! Repeater 3000, this newest repeater is at the moment the top-of-the-line producer, with simultaneous triple band and AC3000 Wi-Fi, so it’s able to offering wonderful wi-fi efficiency. Also added to the listing of the large improve, the high-performance Wi-Fi PLC FRITZ! Powerline 1260E, a tool that we have now analyzed in RedesZone and that won’t solely present us with wonderful efficiency, but in addition a lot of superior configuration choices, because it even permits us to configure it in common Wi-Fi repeater mode.

We should do not forget that each the FRITZ! Repeater Wi-Fi repeaters and the FRITZ! Powerline PLC units combine completely into the Wi-Fi Mesh community of the FRITZ! Box routers, having a centralized administration of the complete community, and with Wi-Fi roaming. -Fi between nodes.

Now the efficiency and consumer expertise of the Mesh community has been improved, due to the brand new «Performance Mesh Steering», AVM’s Mesh software program gives a greater wi-fi connection inside the house, because it commonly checks the connection high quality of the units. completely different wi-fi units that we have now related, and “forces” them to alter frequency band in case they don’t have a great efficiency wherein they’re at the moment. Another vital characteristic is that the automated channel number of the Mesh community has now been improved, in order that the most effective radio channel is at all times chosen for the complete Mesh community.

Top-of-the-range Wi-Fi repeaters such because the FRITZ! Repeater 2400 and the FRITZ! Repeater 3000 turn into suitable with 160 MHz bandwidth if Wi-Fi units are additionally suitable, this may permit us to have twice the wi-fi efficiency with the identical variety of antennas. The 160MHz channel width is a vital characteristic for smartphones and tablets, since usually we are going to solely have one or two inside antennas.

Of course, with the brand new model of FRITZ! OS, we are going to proceed to get pleasure from all of the options and configuration choices that we had to this point. Currently, FRITZ! which have acquired the FRITZ! OS 7.20 replace are as follows:

We advocate you entry the official website of AVM FRITZ! the place you can find all the small print of the brand new firmware model.

Leave a Comment