How to access the D-Link DNH-100 for local management via RJ-45 console

If you will have DAP access factors from the producer D-Link, buying this D-Link DNH-100 Wi-Fi controller is nearly important as a result of we is not going to have to have a pc or server completely on, we are going to save the value of mentioned pc or server, and we will even save on electrical vitality as a result of this system consumes little or no. The worth of this gear is round 140 euros, a extremely aggressive worth if we take note of what a pc or server devoted particularly to this job would value us.

Previously in RedesZone we have now provided you a whole unboxing and first impressions of the gear, the place we clarify what the RJ-45 console port was for, and in addition the place we clarify a few of its major traits.

We should not overlook that this DNH-100 incorporates Nuclias Connect, a whole management and administration software program for APs from the producer D-Link, which is able to permit us to perform very superior wi-fi configurations, to completely adapt to the necessities of firms. In the following video, we clarify intimately all the obtainable choices, and the way we have now an expert community configured:

How to join via RJ-45 console to the D-Link DNH-100 Wi-Fi controller

To join via RJ-45 console to the D-Link DNH-100 Wi-Fi controller, the very first thing we are going to want is to purchase particular cabling, since the field doesn’t embrace what is critical to access by this technique. We have two attainable choices to access via console with a laptop computer or desktop pc, which doesn’t have an RS-232 port.

First alternative: purchase an RJ-45 to RS-232 console cable and a RS-232 to USB adapter

In this primary possibility, we can have to purchase an RS-232 console cable with an RJ-45 connector, like this:

And later, we can have to purchase the corresponding adapter, like this:

In our case, that is the technique that we’re going to use, as a result of we already had the wiring, each the RS-232 console cable to the RJ-45 port, and the USB adapter. If you shouldn’t have the wiring, it might be a superb possibility to purchase the USB to RJ-45 console cable immediately, as a result of we are going to save area for the wiring and in addition cash since it’s a single cable. When inserting the cable into the USB port, the working system will acknowledge that it’s a serial cable, and can present it to us in the “Device Manager”, you will have to set up the essential driver to use it.

Second possibility: purchase a console cable from USB to RJ-45 port

In this second possibility, it is so simple as shopping for a console cable like this, and we are able to simply join via console:

Once we have now bought the essential wiring, we proceed to the subsequent step.

Setting up PuTTY or the console program you utilize

PuTTY is one in all the most used and well-known packages to access via Telnet, SSH and in addition by way of the console. This program is moveable and utterly free, the configuration that we should make in PuTTY or in another program to join accurately via the console is the following:

  • Speed ​​(baud): 115200bps
  • Data bits: 8
  • Parity: none
  • Stop bits: 1
  • Flow management: none

With this configuration utilized, we proceed to join the wiring, and click on on join, a console menu will routinely seem the place we can have to enter the administrator username and password, in any other case, we won’t be able to enter the management and administration of the gear.

As you will have seen, we have now already accessed the gear completely via the console, now we are able to see the totally different management and configuration choices.

Management and configuration choices obtainable

If we access via console by way of the RJ-45 port, we can have precisely the identical management and show choices as if we enter via Telnet or SSH, though on this case, we is not going to have to enter any IP deal with, since we’re connecting regionally .

  • config: we are able to make sure configurations for the inside system, amongst them, the console configuration, the FTP server to load firmwares, LAN configurations, NTP server configuration for the time / date, change the administration password of the Wi-Fi controller. Fi, disable NTP and set the time manually, and even set the time zone.
  • eject: we are able to safely take away each the micro SD card and the system that we have now in the USB port that this Wi-Fi controller has.
  • factoryreset: we are able to restore the gear to manufacturing unit settings.
  • format: we are able to format the micro SD card that we have now inserted (at all times FAT32 format).
  • fwupgrade: we are able to carry out a firmware replace, at all times acquiring the firmware via FTP server in addition to via USB, that’s, the identical choices as by way of the graphical consumer interface.
  • logout: shut CLI session.
  • ping: carry out a ping from the DNH-100 to a pc on the community.
  • reboot: permits us to reboot the system safely.
  • save: permits us to save the short-term configuration of the LAN, to everlasting in order that it might endure a restart.
  • present: reveals the data of the gear itself, particularly, we are able to see the present configuration of the following parameters:
    • console: view the standing of the console.
    • ftp: view the present FTP server data.
    • lan: view present LAN data.
    • nc – View Nuclias Connect data (model) and D-Link Single Sign-On standing.
    • sysinfo: view system data.
    • time: view time and time data.
    • timezone: view the time zone.
  • traceroute: carry out a traceroute from the DNH-100 to a pc on the community.
  • uploadlog: permits importing the system log to the FTP server that we have now configured.

As you will have seen, access via the RJ-45 console is a really fascinating useful resource in case of getting any connectivity downside or to access the system’s net administration, as well as, we are able to simply reset the administration password. If you have an interest in getting into this menu via the community, you’ll at all times find a way to enter via Telnet or SSH (the latter is at all times the most beneficial for safety), we can have precisely the identical management and configuration choices.

We advocate you access our web page D-Link contents the place you can find tutorials and evaluation of their merchandise.