That optical drives are in decline is a reality, and proof of that is that fewer and fewer laptops incorporate them, and in reality even desktop PC instances typically come with out 5.25 ″ bays to set up one of these items. However, in case you have a laptop computer that also incorporates considered one of these, then we’re going to present you how one can substitute it with a hard drive to increase its storage capability.
As a be aware, this may not work for all laptops because it relies on how the optical drive is mounted. Make positive it’s appropriate with your particular mannequin earlier than shopping for something and beginning to observe this tutorial.
Since optical drives in laptops use the identical SATA interface as 2.5-inch SSDs and hard drives, you solely want a mere adapter that you may purchase at any on-line retailer for little or no cash.
In addition to this adapter, in fact you will want a hard drive or SSD in 2.5 ″ format and, as a basic rule, it would have to be 7 / 9.5 mm thick at most (one thing that in the present day is the usual ). Capacity and sort is up to you, however ensure that it’s that thick and its interface is SATA 3.
Finally, you’ll solely want a star screwdriver (Philips) of which all of us have at house.
How to change your laptop’s optical drive for a hard drive or SSD
Once you might have all of the supplies, step one is to take away the optical drive from the laptop computer. In the overwhelming majority of laptop computer fashions you’ll not want to open it or disassemble it to have the option to accomplish that, for the reason that common factor is that there are merely one or two screws on the backside of the gadget that, merely eradicating them and pulling the unit, will enable us to take away it.
The subsequent step is to insert your hard drive or SSD into the adapter. As a basic rule you’ll merely have to match it, with out the necessity for screws, and also you merely have to be sure that the SATA connector of the disk or SSD matches completely into the adapter. Simple directions for this are normally included within the adapter itself.
Now, if the optical drive of your laptop computer had an exterior cowl in order that it appears good on the surface, you should have to take away it and mount it on the adapter. Usually it has customary anchors and you’ll not have issues. Once that’s performed, merely insert the adapter into your laptop’s optical drive slot ensuring you do it the appropriate manner.
Now merely substitute the screw you eliminated at first, earlier than eradicating the optical drive, and voila. If you have performed the entire thing proper, the subsequent time you activate your laptop computer it ought to detect the brand new hard drive or SSD as simply one other drive in your laptop, and you should use it usually.