How to Synchronize Video and Audio Tracks in Final Cut Pro

Sound and picture: each are essential

When creating audiovisual content material, particularly when beginning out, a variety of consideration is normally paid to the picture to the detriment of the sound, and actually caring for the sound is simply as essential as providing the general public a high quality picture. It is ineffective to have the ability to report at most decision and for the pictures to be very engaging, if later the sound is poorly heard and the viewer is just not ready to clearly perceive what’s being informed in the audiovisual doc.


The supreme is to obtain that mixture of picture and sound high quality, for this, many creators select to join a high quality microphone to the digicam with which they’re recording, the issue comes on many events as a result of the space that separates the supply of The audio from the digicam or, primarily, from the microphone is just too giant and makes it inconceivable to accurately seize the specified sound, due to this fact, it’s virtually obligatory to seize the video and audio individually, and it is usually mandatory to use two completely different units for it.

Micro + camera

Obviously, these two units generate two completely different tracks, one for audio and one for video. However, as we talked about earlier, this observe tends to complicate the modifying course of a bit, since, clearly, the synchronization of each tracks, the audio and the video, can change into sophisticated relying, particularly, on the conditions in which it’s recorded.

Different methods to sync it

In order to facilitate and provide the mandatory instruments to have the ability to accurately and successfully synchronize your video and audio tracks, under we would like to speak to you concerning the alternative ways you’ll be able to select when finishing up this course of. It actually could be a matter of some seconds, since you are able to do it each routinely, thanks to the ability that Final Cut has, and manually, if you would like to have absolute management of the whole lot. However, our suggestion is that you just depart this course of in the arms of Final Cut, as it’ll make sure you get an ideal outcome and it’ll solely take a couple of seconds. However, on some events it’s possible you’ll want to know the way to synchronize the audio and video manually, so under one can find the 2 methods to do it.

Do it manually

The first possibility is to sync manually. It actually is just not very sophisticated however if in case you have to take into consideration a sequence of factors that, if not, will find yourself having a defective outcome. In this case, you’ll be able to select two completely different routes relying on whether or not or not you will have the power to have entry to the video and audio recording course of.

If so, we advocate {that a} sound be made in the course of the recording that enables the editor later to know that that precise second will assist them to be part of the 2 tracks and that the synchronization is ideal. This is normally executed by clapping or saying phrases like “now”, “sure”, “hiya”, or “attempting.” In this manner, in the modifying course of, the one factor that the particular person in cost of modifying the audiovisual doc has to do is be part of each tracks for the second in which stated phrase is claimed.

Micro and camera

In case the recording course of can’t be accessed and there isn’t a clear junction level between the 2 tracks, the one manner to do that synchronization is to discover that junction level throughout the recording. Usually it’s the second in which the participant or one of many contributors begins to communicate, in this manner the primary phrase stated by stated particular person is taken as the purpose of union and there the purpose is to synchronize the 2 tracks.

Synchronize clips manually

Let Final Cut sync it routinely

On quite a few events we’ve got commented on the big potential that Final Cut has, which is why it’s the favourite software program of {many professional} editors who’re devoted to the world of audiovisual creation. In this case, we would like to speak to you, particularly, concerning the device that the Apple video editor has to routinely synchronize your audio and video clips, sure, you will have heard accurately, routinely. You simply have to press a button and Final Cut will intelligently care for becoming a member of your two tracks into one which will likely be utterly and completely synchronized.

The course of is actually easy, it’ll take you a lot much less time than attempting to do it manually and, after all, the outcome will likely be clearly optimistic. You will depart behind the doubts of whether or not the actions of the mouth actually coincide utterly with what’s sounding always. With this technique you’ll ensure that a hundred percent that your completely different audio and video clips are completely synchronized. Here are the steps you will have to observe to get it.

  1. Select your video and sound tracks that you really want to sync in the Final Cut browser.
  2. With each chosen, proper click on and choose the “Synchronize clips” possibility.

Synchronize clips automatically

With these two easy steps you’ll acquire the clip in which the 2 tracks, the audio and the video, are merged and they are going to be completely synchronized. Our suggestion is that, with few exceptions, you utilize this technique to perform the synchronization of the audio and the video for 2 major causes, the primary of them, it is rather straightforward to do, as you will have seen, you simply have to choose the 2 clips and hit “Synchronize clips”, that’s, it takes only a few seconds, and after all, as a result of the result’s excellent, which is the objective you’re searching for in spite of everything.